• Home
  • ENVIRONMENT. TECHNOLOGY. RESOURCES
  • Environment. Technology. Resources. 12th International Scientific and Practical Conference
  • ENVIRONMENT AND RESOURCES
  • Cubars

    • ANALYSIS OF COMPOSITE BIOMASS FUELS PROPERTIES

    Edgars Cubars, Liena Poiša


    Last modified: 29.04.2019

    Abstract

    There is a growing interest about the possibility of exploiting the local biomass as an energy source. The main resource for biofuel production in Latvia is wood. Water plants, like common reed, growing in nearly all of the water reservoirs in Latvia, and all cultivate plants and residues of cereal crops, also can be good alternative for solid bio fuels production. The aim of this paper is to analyze possibilities to make composite fuels from these recourses. The study reveals research of ash content and highest burning heat value in different composite biomass fuels. It contains analysis of samples obtained from various local Latvian biomass types, i.e. reed, wood, flax spray, hay, hemp and peat, by combining them in different proportions. The study contains optimal combining proportions of different biomass types for composite fuel production basing on the ash content and burning heat in them. The results of the study show that the value of wood highest burning heat is higher than another biomass types like reed, peat, hay, hemp and flax spray. It means that combining of different biomass types with wood, will reduce the calorific value of composite biomass. Also, wood is a fuel with a low ash content, and admixture of various biomass types available in Latvia, as well as admixture of coal dust to the wood in composite duels, increases ash content in the respective fuels. In order to increase the burning heat and decrease ash content value to the optimal level and to diversify raw materials necessary for biomass fuel generating process, the authors analyze possibilities of using composite fuels by combining wood and coal dust.

    Keywords


    highest burning heat value; ash content; biomass; common reed; wood; peat; composite fuels; cereal crops

    References


    [1]     Baskar C.,Baskar S., Dhillon R. (2012) Biomass Conversion. The Interface of Biotechnology, Chemistry and Materials Science, Springer-Verlag Berlin Heidelberg, p.91-98.

    [2]     Science & Technology on Bio-hylic and Biomass Resources in China: A Roadmap to 2050 (2010) Zhang, Xinshi, Huang, Hongwen et all., pp 37-53.

    [3]     Broņka A., Zvirbule-Bērziņa A. (2012) Policy of the european union in the field of renewable energy resources in the context of common power industry policy. In: Proceedings of the international scientific conference Renewable energy and energy efficiency, Jelgava, p.225-230.

    [4]     Biomasas izmantošanas ilgtspējības kritēriju pielietošana un pasākumu izstrāde (2009) Adamovičs A., Dubrovskis V., Plūme I. u.c. Valsts SIA „Vides projekti”, Rīga, 16-38. lpp.

    [5]     Wood2energy (2010) Jakson S.W., Rials T.G., Taylor A.M., Bozell J.G., Norris K.M., University of Tennessee, p.2-53.

    [6]     Wood to energy in Washington: Imperatives, Opportunities, and Obstacles to progress (2009) Mason C.L., Gustafson R., Colhoun J, Lippke B.R., Rafaeli N., University of Washington, Washington 2009, p.139-148.

    [7]     Mantau, U. et al. (2010) EU wood - Real potential for changes in growth and use of EU forests. Final report. Hamburg, Germany, 160 p.

    [8]     Latvijas atjaunojamo energoresursu izmantošanas un energoefektivitātes paaugstināšanas modelis un rīcības plāns (2009) Blumberga A., Bažbauers G. u.c. RTU, 35-37 lpp.

    [9]     Enerģētisko augu audzēšana un izmantošana (2007) Adamovičs A.,Agapovs J., Aršanica A. u. c. Valsts SIA „Vides projekti”, Rīga, 43-133. lpp.

    [10]   Lazdiņa D., Lazdiņš A. (2011) Īscirtmeta kārklu plantācijas un to izmantošanas iespējas LVMI “Silava”, Salaspils 2011, 4.-32. lpp.

    [11]   Tahir M., Casler M.D., Moore K.J., Brummer C. (2011) Biomass Yield and Quality of Reed Canarygrass under Five Harvest Management Systems for Bioenergy Production. In: Bioenerg. Res. 4, p.111–119.

    [12]   Schafer W. (2012) Fibre crops for energy production and energy saving. In: Proceedings of the international scientific conference Renewable energy and energy efficiency, Jelgava, p.7-12.

    [13]   Bassam N.El. (1998) Energy plant species. Their use and impact on environment and development. In:James and James(Science publisher) London, p.1-98.

    [14]   Poiša L., Adamovičs A. Šiaudinis G.,et.all. (2011) The chemical content of diferent energy crops. In: Proceedings of the 8th international scientific and practical conference Environment.Tehnology.Resources, Rēzeknes Augstskola, p.195.

    [15]   Jansone I, Gaile Z. (2012(b)) Cereal grain as alternative fuel in Latvia. In: Proceedings of the international scientific conference Renewable energy and energy efficiency, Jelgava, p.33-38.

    [16]   Komlajeva Ļ., Adamovičs A., Poiša L. (2012) Comparison of different energy crops for solid fuel production in Latvia. In: Proceedings of the  International Scientific Conference ,,Renewable Energy and Energy Efficiency’’,  p. 45.-50.

    [17]   Jankauskiene Z., Gruzdeviene E. (2012) Industrial hemp- a promising source for biomass production. In: Proceedings of the international scientific conference Renewable energy and energy efficiency, Jelgava, p.13-18.

    [18]   Kolodziej J., Wladyka-przybylak M., Mankowski J., Grabowska L. (2012) Heat of combustion of hemp and briquettes made of hemp shives. In: Proceedings of the international scientific conference Renewable energy and energy efficiency, Jelgava, p.163-166

    [19]   Komlajeva Ļ., Adamovičs A., Poiša L. (2012) Comparison of different energy crops for solid fuel production in Latvia. In: Proceedings of the  International Scientific Conference ,,Renewable Energy and Energy Efficiency’’,  p. 45.-50.

    [20]   Komlajeva Ļ., Adamovičs A. (2012) Evaluation of flax (linum usitatissimum L.) quality parameters for bioenergy production. In: Proceedings of the 11th international scientific conference “Engineering for rural development”, May 24.-25., Jelgava, Latvia p. 490-494.

    [21]   Kronbergs E., Šmits M. (2009) Cutting properties of common Reed biomass. In: 8th international scientific conference “Engineering for rural development”, May 28.-29., Jelgava, Latvia, p.207.

    [22]   Komulainen M., Simi P.,Hagelberg E., Ikonen I., Lyytinen S. (2008) Reed energy-Posibilities of using the Cammon Reed for energy generation in Southern Finland. In: Turku university of applied sciences reports 67. p.5-75.

    [23]   Reed up on Reed (2007) Ikkonen I., Roosaluste E., Pitkanen T.et.all. Southwest Finland regional Environment centre, Turku 2007. , p. 5-115.

    [24]   Gravalos I., Xyradakis P. et all. (2016): An experimental determination of gross calorific value of different agroforestry species and bio-based industry residues, Natural Resources, 7, pp.57-68.

    [25]   LVS CEN/TS 14775:2004: Solid biofuels- Method for the determination of ash content.

    [26]   Arhipova I., Bāliņa S.(2006) Statistika ekonomikā. Risinājumi ar SPSS un Microsoft Excel. 2.izdevums. Rīga: Datorzinību centrs, 352. lpp.

    [27]   Kakitis A., Ancans D., Nulle I. (2014) Evaluation of combustion properties of biomass mixtures, Engeniering for rural development, pp. 423-427.

    [28]   Tardenaka A., Spince B. (2006) Characterization of fuel granules and briquettes produced from fine-dispersed wastewood. In: International conference Eco-Balt 2006, Riga, Latvia, p. 37-38.


     







    © Rēzeknes Tehnoloģiju akadēmija